News:

Due to a technical issue, some recently uploaded pictures have been lost. We are investigating why this happened but the issue has been resolved so that future uploads should be safe.  You can also Modify your post (MORE...) and re-upload the pictures in your post.

Main Menu

58 Extended Deck Trim

Started by Skwerly62, May 13, 2016, 09:34:44 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Skwerly62

I had some feelers out but no luck yet. I need one quarter trim spear for a series 62 sedan.
It is 69.75" long! Anyone have a semi-decent driver quality one? Thanks!

Chris I
In PA zip 18938
1958 Extended Deck 62 Sedan SOLD
1960 Coupe - current project
USCG Vet - Fly CG!

raugusti

Chris,
Which side do you need?
I have a 58 Extended deck that I am leaning toward parting out.  If I do, I'll let you know. Anything else you need specific to the Extended Deck?

Scott
Scott Augustine
Colorado, USA
'58 Series 62 Conv.
'58 Eldorado Seville

Skwerly62

Thanks Scott, I thought they were the same but if not I need the passenger side. Thankfully that's the last missing piece I need. Lemme know if you do please. Thanks!

Chris
1958 Extended Deck 62 Sedan SOLD
1960 Coupe - current project
USCG Vet - Fly CG!

David King (kz78hy)

Chris,

I have driver quality one.  P/N 4696489 RH.  I've noted it fits 57/58.

$25 as I want it gone and will not fit anything I own.  Shipping might be more that the part.

David
David King
CLC 22014  (life)
1958 Eldorado Brougham 615
1959 Eldorado Brougham 56- sold
1960 Eldorado Brougham 83- sold
1998 Deville d'Elegance
1955 Eldorado #277
1964 Studebaker Commander
2012 Volt
CLCMRC benefactor 197

Director and Founder, Eldorado Brougham Chapter
Past President, Motor City Region

Rare Parts brand suspension parts Retailer via Keep'em Running Automotive

Skwerly62

1958 Extended Deck 62 Sedan SOLD
1960 Coupe - current project
USCG Vet - Fly CG!

Skwerly62

#5
Bump - still needed
David had good intentions but I made the assumption he had the right part.
XTended deck trim for series 62 NOT SDV.
69.75" LONG and about 5/8" wide triangular rear quarter trim.
Skwerly55email addresses not permitted
1958 Extended Deck 62 Sedan SOLD
1960 Coupe - current project
USCG Vet - Fly CG!

Skwerly62

Thanks Vince, I recall you gave me his info before but though he was only selling whole.  I will give him a shout and see if he is willing to part at all. Thanks again.

Chris
1958 Extended Deck 62 Sedan SOLD
1960 Coupe - current project
USCG Vet - Fly CG!

raugusti

Chris,
This is what I have, if you still need it.  It has a dent at the trunk end as shown in the photo.
If you do still want it, any hints on removal?

Scott
Scott Augustine
Colorado, USA
'58 Series 62 Conv.
'58 Eldorado Seville

raugusti

Chris,
Working with another member, I had determined that this is a Sedan de Ville as well.  The paperwork I got with the car says Extended Deck.
The upper part of the fender trim matches your measurements, but could be different.

Scott
Scott Augustine
Colorado, USA
'58 Series 62 Conv.
'58 Eldorado Seville

Skwerly62

Scott,
I'm sorry I just saw your reply! The trim should be 69.75" long from taillight to rear door edge. It looks fine to me for my car. I believe most of the trim is held on by clips inside the fender well. Please call me at your convenience. Thanks so much.
(215)703-8063
1958 Extended Deck 62 Sedan SOLD
1960 Coupe - current project
USCG Vet - Fly CG!