Author Topic: WTB Curved glass for 1939 LaSalle center (radio) section  (Read 124 times)

Offline HFDJR1959@GMAIL.COM

  • Posts: 5
    • CLC Member
      CLC Member #30062
  • Name: Herman Dick
WTB Curved glass for 1939 LaSalle center (radio) section
« on: February 03, 2018, 04:22:04 PM »
Looking to buy the curved glass for the center section on the dash for mu 1939 LaSalle coupe (15.5 in by 1.5 in).  I have a spare glass for the speedo but it is not long enough.

Herman Dick 
Columbus, Ohio
CLC Member 30062

1939 LaSalle 2 door coupe

Offline virgil

  • Posts: 4
    • CLC Member
      CLC Member #8294
  • Name: virgil lysgaard
Re: WTB Curved glass for 1939 LaSalle center (radio) section
« Reply #1 on: February 15, 2018, 05:25:04 PM »
Hi Herman   I'm looking for all three pieces for my 1939 Cadillac. I would be interested in your spare  glass if the price is reasonable.   Regards, Virgil Lysgaard. CLC member.
« Last Edit: February 15, 2018, 05:35:53 PM by virgil »

Offline ederm

  • Posts: 13
  • Name: Mike Eder
Re: WTB Curved glass for 1939 LaSalle center (radio) section
« Reply #2 on: February 16, 2018, 12:32:00 PM »
Hi, I  may have some center sections that I made from 1/8 inch plate window glass. I bought a kiln and made a mold but there are some imperfections in the glass from the sand from the clay mold.  I cut the glass a little too wide to compensate for the curvature so it would have to be ground down a fraction. You would have to put some tiny washers behind the 2 studs on the backing plate to prevent cracking. I will check and see if I still have them.
M Eder

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12