News:

Due to a technical issue, some recently uploaded pictures have been lost. We are investigating why this happened but the issue has been resolved so that future uploads should be safe.  You can also Modify your post (MORE...) and re-upload the pictures in your post.

Main Menu

1949 convertible door striker

Started by ccp49, January 29, 2011, 08:47:11 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

ccp49

Hello, all.
Wondering if anyone knows whether the strike plates (the plate that attaches to the door jamb with two sunken phillips screws) is the same on all doors.  Mine have some wear and so would need to repair before replating.  Or, find some replacements to replate that are not worn.   Thinking I have a better chance finding some rear door strike plates that are usable.
Thanks,
Dan
Dan Barbieri
'49 Conv "in the works"
Cedar Rapids, Iowa

ccp49

And, yes, I realize there is left and right for all models.
Dan Barbieri
'49 Conv "in the works"
Cedar Rapids, Iowa

Jeff Maltby 4194

#2
I have some off a sedan that have little wear . I asked my buddy whom has restored 2 49 Converts and they are the same. 
Jeffo 49er chapter

CLC 1985
Honda Gold Wing GL1500

Dan Barbieri

Jeff,
Don't you have a club coupe? If so, can you check to see whether your sedan strike plates are the same as on the CC?  I would bet the Coupe plates are the same as the convertible plates, no?

Thanks,
Dan

cad1949 convertible

Hi rear on a sedan( 4 door), is the same in front of a convertible.
regards Johan Karlsson Sweden.
Johan Karlsson (cad1949 convertible)