Print Page - 1976 Eldo, turn signal switch removal.

Title: 1976 Eldo, turn signal switch removal.
Post by: dave hanson on August 14, 2009, 05:41:29 PM

there is a rectanqular plate where the screw that holds the switch arm on would normaly be. appears to be no way to remove the arm

Title: Re: 1976 Eldo, turn signal switch removal.
Post by: Ted in Olympia WA on August 14, 2009, 06:24:38 PM

The arm unscrews. At the base you will see a flat spot for a wrench or pliers. What you have to watch out for is breaking your cruse control wire when you unwind it.

TED

Title: Re: 1976 Eldo, turn signal switch removal.
Post by: The Tassie Devil(le) on August 15, 2009, 06:35:53 AM

The Workshop Manual is very specific in describing the removal and replacement of the arm.

It mentions that the arm takes 6 turns to remove, and when replacing, the wire has to be wound on 6 turns before attempting to re-install.

Bruce. >:D

Title: Re: 1976 Eldo, turn signal switch removal.
Post by: dave hanson on August 15, 2009, 01:54:45 PM

Thanks, Ted and Bruce , for the info

Cadillac & LaSalle Club Discussion Forum

Cadillac & LaSalle Club Forums => Technical / Authenticity => Topic started by: dave hanson on August 14, 2009, 05:41:29 PM