News:

Due to a technical issue, some recently uploaded pictures have been lost. We are investigating why this happened but the issue has been resolved so that future uploads should be safe.  You can also Modify your post (MORE...) and re-upload the pictures in your post.

Main Menu

Better mirrors for LaSalle convertible

Started by gary griffin, July 17, 2017, 03:51:15 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

gary griffin

 Existing mirrors are too small and are deteriorated beyond their useful life. Since it is a convertible they are mounted on the window frame with two small screws at 2 inches apart which I think is standard.

I simply need bigger mirrors or possibly with oval shaped mirrors or longer mounting brackets  or mirrors what have offset attachment to the arms to reach out a little more.

  I looked through Kanters website and could not find what I want. Not needing authenticity as much as better rear visibility. 
Gary Griffin

1940 LaSalle 5029 4 door convertible sedan
1942 Cadillac 6719 restoration almost complete?
1957 Cadillac 60-special (Needs a little TLC)
2013 Cadillac XTS daily driver

Steve Passmore

Steve

Present
1937 60 convertible coupe
1941 62 convertible coupe
1941 62 coupe

Previous
1936 70 Sport coupe
1937 85 series V12 sedan
1938 60 coupe
1938 50 coupe
1939 60S
1940 62 coupe
1941 62 convertible coupe x2
1941 61 coupe
1941 61 sedan x2
1941 62 sedan x2
1947 62 sedan
1959 62 coupe

Brad Ipsen CLC #737

Like Steve said these work.  The only problem is the base is a little wide for the window frame.  The other trick is to use a stick on convex mirror for the right side.  Even for judging they work.  When you attach them don't take all of the paper off of the sticky tape.  Remove the mirror for judging and then reattach using the fresh glue under the paper previously left on.
Brad Ipsen
1940 Cadillac 60S
1938 Cadillac 9039
1940 Cadillac 6267
1940 LaSalle 5227
1949 Cadillac 6237X
1940 Cadillac 60S Limo

gary griffin

#3
Steve,  These are what I have. One fell off and the other is ready to. The sockets are worn and they rotate at will.  It appears  I will need to use similar as I can not find larger or oval shaped mirrors.

Brad,  I like the idea of a stick on convex mirror. Would prefer bigger one but if I can not find one I will probably stick on as you do. I am not too concerned about judging as I have no plans to do more than local shows. The 2 inch center to center on the screw holes seems to be the standard. 

Thanks for the advice!!
Gary Griffin

1940 LaSalle 5029 4 door convertible sedan
1942 Cadillac 6719 restoration almost complete?
1957 Cadillac 60-special (Needs a little TLC)
2013 Cadillac XTS daily driver