News:

Due to a technical issue, some recently uploaded pictures have been lost. We are investigating why this happened but the issue has been resolved so that future uploads should be safe.  You can also Modify your post (MORE...) and re-upload the pictures in your post.

Main Menu

wanted stainless steel trim 1949 convertible

Started by gangster49vert, May 15, 2012, 01:37:44 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

gangster49vert

I'm looking for the rear stainless trim above the trunk that follows the upper doors and rear upper quarter panels below the convertible top ..let me know what you got thanks all

ccp49

I might have a couple rear quarter pieces - the left and right side that connect up to the single piece that runs along the convertible well. It's hard to find the convertible well piece for some reason.  If you don't have it, you'll also need a mounting strip for this piece.  it is a perforated, molded steel strip that gets screwed down to the body, and the stainless gets clipped on to the steel strip. 
I'll check my box of extra parts. 

dan Barbieri
Dan Barbieri
'49 Conv "in the works"
Cedar Rapids, Iowa