Author Topic: NORS Rebuilt Driveshaft - For 1971 1972 1973 1974 1975 1976 Fleetwood?  (Read 93 times)

Offline P. Manoogian

  • CLC #29766
  • Posts: 217
  • Name: P.Manoogian
275.00 plus shipping

PLEASE COMAPE - my sense is this is for a Deville Fleetwood of the 1970s such as 1971 1972 1973 1974 1975 1976

This is from a long closed machine shop. I am identifying this based on a thread in the Cadillac Lasalle Club Forum entitled[/size]

74 Fleetwood Driveshaft/ propeller shaft length
(you can copy and paste that in the CLC forum to read the thread posted on [size=0px]September 04, 2017, 04:49:14 PM )

I have also compared it to a drive shaft that was in a 1967 DeVille.


Overall length is 72.75" (that is measured by standing it up on its end and placing the tape from edge of rear flange to tip of yoke.

Tube length is 55.25 (that is measured from weld edge to weld edge)

Tube Diameter at widest = 4"

You can see an extension in the tube of 3" which I theorize makes this specific to Fleetwood, but please compare.

Yoke Diameter is 1 7/8" whereas the one in the 1967 Driveshaft is 1 5/8"

You can also have this shortened if it is too long for your application.

PLEASE NOTE - I WILL SHIP THIS IN A PVC DRAIN PIPE Weight will be in the 45 to 50 pound range and length  will be about 75" x 7 x 7. ASK FOR A SHIPPING QUOTE inclusive of pipe purchase.
« Last Edit: October 11, 2017, 08:24:17 AM by P. Manoogian »
1961 Eldorado - Shell Pearl/Mauve
1959 Coupe DeVille - Vegas Turquoise
2012 CTS Coupe- Crystal Red
1970 AMX