Get the CLCMRC 2018 Calendar - AVAILABLE NOW!


Author Topic: 1939 Series 61 Stainless  (Read 120 times)

Offline curtmacd

  • Posts: 19
  • Name: Curtis Macdonald
1939 Series 61 Stainless
« on: November 07, 2017, 01:17:29 PM »
I'm wanting to buy the two stainless belt moulding pieces for each side of my Series 61 as identified in the attached picture. For some reason, these have disappeared? I never had them to begin with and need them to complete the restoration. I believe that the LaSalle is the same? Please contact me if you have them available for both sides. Thank you, Curtis - macdonald@reagan.com

Offline bariman

  • Posts: 102
    • CLC Member
      CLC Member #17324
  • Name: dennis buchholz
Re: 1939 Series 61 Stainless
« Reply #1 on: November 08, 2017, 07:37:10 AM »
I have these for a lasalle.  Show condition.  What is the length you need?

Dennis

Offline curtmacd

  • Posts: 19
  • Name: Curtis Macdonald
Re: 1939 Series 61 Stainless
« Reply #2 on: November 08, 2017, 02:27:16 PM »
Dennis, I just need the two short pieces for each side, just like the ones circled in the pic, driver and passenger side. I never had mine, so I can't get an accurate measurement. I wouldn't want to break up a complete set from someone, but if you have the individual pieces, I would be interested. Email is macdonald@reagan.com if you happen to have pics to share?
Thanks for the reply.
Curtis

Offline Steve Passmore

  • Posts: 4987
  • Name: Steve Passmore
Re: 1939 Series 61 Stainless
« Reply #3 on: November 08, 2017, 02:56:10 PM »
Curtis, if you measure the cowl area where the trim sits that should be all that Dennis needs. Different body styles used different lengths at the cowl sides.
Steve

Offline curtmacd

  • Posts: 19
  • Name: Curtis Macdonald
Re: 1939 Series 61 Stainless
« Reply #4 on: November 08, 2017, 05:58:43 PM »
Thanks for the help with this guys. Dennis is shipping me a nice pair.  :)

 

Get the CLCMRC 2018 Calendar - AVAILABLE NOW!