News:

Due to a technical issue, some recently uploaded pictures have been lost. We are investigating why this happened but the issue has been resolved so that future uploads should be safe.  You can also Modify your post (MORE...) and re-upload the pictures in your post.

Main Menu

Trying to ID a 67 deck lid lock & flipper

Started by Bob Hoffmann CLC#96, November 29, 2017, 06:12:56 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Bob Hoffmann CLC#96

Does anyone have a 67 unit out of a car? I need  front & back pic. & some dimensions. Please send directly to bobscads@comcast.net
Thanks, Bob
1968 Eldorado slick top ,white/red interior
2015 Holden Ute HSV Maloo red/black interior.
             
Too much fun is more than you can have.

cadillactim

Bob

The 64-67 key lock covers are the same, while 68 is by itself. The easy way to tell the difference between them is the lock key cylinder is easy to remove on the 68, unlike the 64-67 which has the cylinder going inside the pot metal housing.

Tim
Tim Groves

Bob Hoffmann CLC#96

Hi Tim,
Finally got some pics of what I have. It's about 2 1/2" point to point. Can you ID it?
Thanks, Bob
1968 Eldorado slick top ,white/red interior
2015 Holden Ute HSV Maloo red/black interior.
             
Too much fun is more than you can have.

cadillactim

That's a 68. If my memory is correct it will work on 64-67 trunks also, you will just have to use the 68 lock cylinder, as the others won't fit into the 68 housing.

Tim
Tim Groves