News:

Due to a technical issue, some recently uploaded pictures have been lost. We are investigating why this happened but the issue has been resolved so that future uploads should be safe.  You can also Modify your post (MORE...) and re-upload the pictures in your post.

Main Menu

1941 Cadillac hood locking latch

Started by Caddy41, October 02, 2016, 11:50:14 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Caddy41

Hi  ...Wanted a 1941 Cadillac hood locking mechanism and sheet metal complete that bolts inside front of hood  also the 2 lock hooks which bolt onto the radiator support....

Bob Hoffmann CLC#96

Doug,
I should have it. What series is your car?
Bob
1968 Eldorado slick top ,white/red interior
2015 Holden Ute HSV Maloo red/black interior.
             
Too much fun is more than you can have.

Caddy41

Hi  Bob  Series 62                 Thanks  Doug

Steve Passmore

I have some of these parts for the 62 series if Bob can't help you.
Steve

Present
1937 60 convertible coupe
1941 62 convertible coupe
1941 62 coupe

Previous
1936 70 Sport coupe
1937 85 series V12 sedan
1938 60 coupe
1938 50 coupe
1939 60S
1940 62 coupe
1941 62 convertible coupe x2
1941 61 coupe
1941 61 sedan x2
1941 62 sedan x2
1947 62 sedan
1959 62 coupe

Bob Hoffmann CLC#96

Doug,
I'll check today & send you an email.
Bob
1968 Eldorado slick top ,white/red interior
2015 Holden Ute HSV Maloo red/black interior.
             
Too much fun is more than you can have.

Caddy41

Hi  Steve  .. Bob  has the parts .... thanks for your input ...... regards  Doug

Caddy41

Hi  Bob...Would you have 2 grill screws  they are 5/16  x 10  threads to the inch about 2" long  have Filster head  cross slots....also  crest bezel for side vent..dosent have be perfect just so long as I can get it re plated..and a question about the clips that hold on the series 62 rocker spear mold  what do the look like?  Thanks  Doug

Steve Passmore

When you say "Spear" moulding are you just talking about the rocker stainless covers?
Steve

Present
1937 60 convertible coupe
1941 62 convertible coupe
1941 62 coupe

Previous
1936 70 Sport coupe
1937 85 series V12 sedan
1938 60 coupe
1938 50 coupe
1939 60S
1940 62 coupe
1941 62 convertible coupe x2
1941 61 coupe
1941 61 sedan x2
1941 62 sedan x2
1947 62 sedan
1959 62 coupe

Caddy41

#8
Hi  Steve....Yes the rocker stainless cover  series 62...there 1 rows of holes in the reverse curve..holes along the 1" side  and then it has metal thread screws about 6 securing it to the the underneath of the rocker  I have now acquired a set and don't know what clips would hold them in place   Thanks  Doug

Bob Hoffmann CLC#96

Quote from: Caddy41 on October 07, 2016, 03:47:37 AM
Hi  Bob...Would you have 2 grill screws  they are 5/16  x 10  threads to the inch about 2" long  have Filster head  cross slots....also  crest bezel for side vent..dosent have be perfect just so long as I can get it re plated..and a question about the clips that hold on the series 62 rocker spear mold  what do the look like?  Thanks  Doug
Hi Doug,
I may have some of the additional items you need. Please allow me to look. Maybe someone knows if they've reproduced the little upper clips. Those have always been a tough item.
Thanks, Bob
1968 Eldorado slick top ,white/red interior
2015 Holden Ute HSV Maloo red/black interior.
             
Too much fun is more than you can have.

Caddy41


Bill Ingler #7799

Below picture shows the clips that were reproduced years ago by Charlie Babock for attaching the 41 rocker moldings. I think there should be six but I only have five. $ 25 shipping include US ONLY. If interested please email me at inglerfly@cox.net.  Thanks   Bill

Caddy41

Hi  Bill ...Thank you for your interest.....I can make clips .. but would be ideal to see the originals  ..there would be 2 types for series 62  ..clip similar to yours that pokes into a 1/4" hole along the reverse curve rocker  and probably a spring loaded clip along the 1" edge to keep pressure and mold  ..Thanks again for you input  Regards  Doug

Steve Passmore

Only ever seen the one type that Bill shows on all my 41s?    Stainless slots over the top clips and is held by the screws on the underside?
Steve

Present
1937 60 convertible coupe
1941 62 convertible coupe
1941 62 coupe

Previous
1936 70 Sport coupe
1937 85 series V12 sedan
1938 60 coupe
1938 50 coupe
1939 60S
1940 62 coupe
1941 62 convertible coupe x2
1941 61 coupe
1941 61 sedan x2
1941 62 sedan x2
1947 62 sedan
1959 62 coupe

Caddy41

Hi  Steve ... Thanks for the advice  ..It shows what a great lot people you are helping out..I thought that they might have been a wire clip similar to a internal door trim  square in shape and relying on the downward tension to hook onto the swage along the edge hold in place....... Regards  Doug

Turn2

I am also looking for the hooks to hold down the hood. I have a 41 series 61 fastback. Please contact me by email @ ekperry@sbcglobal.net or call my cell at 951 533 2071 thank you.

Barry M Wheeler #2189

Bob, not only are these "hood lock plates" used in all 1941 models, they are also used for 1942. (Checked the book.)

I always pass along this tip. When adjusting the rod so that the lady closes with a minimum of fuss, never leave out the cotter key that holds the locking arms in place. I had a good friend with a prize winning '41 convertible sedan leave it out to adjust the rod "one more time" and it fell out. He finally did get the hood unlocked but he also had a large "out" dent in the hood when the 2 x 4 or whatever he was pushing with "slipped."

I have passed this tip along for probably forty years or more and hope it's saved some people the heart ache the good doctor had when he showed his car with the big dent in the hood.
Barry M. Wheeler #2189


1981 Cadillac Seville
1991 Cadillac Seville