News:

Due to a technical issue, some recently uploaded pictures have been lost. We are investigating why this happened but the issue has been resolved so that future uploads should be safe.  You can also Modify your post (MORE...) and re-upload the pictures in your post.

Main Menu

WTB: 1961/1962 skeg stainless piece

Started by quadfins, March 04, 2014, 11:52:19 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

quadfins

I am seeking the stainless trim molding that goes on the lower “skeg” for a 1961 or 1962 Cadillac. It is the rearmost piece that goes between the wheel skirt and the rear bumper, on the driver’s side. It is just over 36 inches long, and is common to all models except the short-deck sedans and, perhaps, the limousines. They are side-specific, so it must be from the driver’s side.
Mine is in good shape, but with one noticeable ding that I find annoying, so I am seeking a replacement in very good condition. Please contact me on or off the list if you have a lead on one of these.

Thanks,

Jim
Jim Eccleston
1961 Coupe de Ville
BATILAC
Senior Crown
DeCou Driving Award x 4