1956 Gen Armature

[Bruce L. Wiley]

Does anyone know the Delco Remy OE number for the armature on a 56 generator? Also, does anyone know where I could get one? Thanks

[Jack Mcilwraith # 10584]

1923535

[Jamy Cyrus]

I dont know where to get the part you need, however are you opposed to changing the car to a 12 volt system?

Jamy56

[P W Allen CLC#20193]

Jamy,

Please be advised that ALL 56s are 12 Volt. No conversion needed. Bruce, You would probably be better off getting a complete rebuilt generator. It will be easier to come by than just the armature. Try USA Parts Supply.

Paul
53 Coupe
Dynaflow

[John Washburn CLC #1067]

Bruce,

That armarture is readily available from most rebuild shops. It was used way into the late 60s. If they have the correct software they can find you one in a few minutes. Or they can get you one that puts out more amps... Use a local shop should be cheaper than goint to a Cadillac speciality joint.

John Washburn
CLC #1067

[Bruce Wiley]

Thanks. John, there is a local auto electric shop that will rebuild the gen, put on new reg, and set it all for less than $90. Im not sure, but that sounds reasonable.

[JIM CLC # 15000]

03-01-05
Bruce, sounds like a fair price to me.
Maybe you could post the Name, address and phone number of the company.
Good Luck, Jim