Print Page - 1947 Fleetwood Front License Plate Bracket

Title: 1947 Fleetwood Front License Plate Bracket
Post by: A. Amman #15293 on April 28, 2011, 03:45:55 PM

Can someone hook me up with a photo of the lower portion of the bracket clamp that grabs the backside of the front bumper to hold the bracket to the bumper? I've lost my reference.

Thanks,
Anthony Amman #15293

Title: Re: 1947 Fleetwood Front License Plate Bracket
Post by: Bill Ingler #7799 on April 28, 2011, 09:30:49 PM

Pictures below should help you. Easy to make. Get some 1 inch wide bar stock and cut off a piece about 1 3/4 inch long. Bend in the middle 90 degrees. Drill about a 1/4 inch hole at one end and you have your bracket. Bill

Title: Re: 1947 Fleetwood Front License Plate Bracket
Post by: A. Amman #15293 on April 28, 2011, 11:39:27 PM

Thank you, Bill! That was just what I needed.

Anthony Amman #15293

Cadillac & LaSalle Club Discussion Forum

Cadillac & LaSalle Club Forums => Technical / Authenticity => Topic started by: A. Amman #15293 on April 28, 2011, 03:45:55 PM