Cadillac & LaSalle Club Discussion Forum

Cadillac & LaSalle Club Forums => General Discussion => Topic started by: V.Sorok on April 18, 2020, 08:56:14 AM

Title: 1918-1919 Cadillac bodies
Post by: V.Sorok on April 18, 2020, 08:56:14 AM
Hello All!

I am new to this forum and am interested in the history and the technical aspects of the early Cadillacs.
I also make 1/43 scale models of Cadillacs.

I see real professionals here and hope to find answers to some of my long-standing questions.
I read the phrase "Nine hood louvers on each side were tilted six degrees inward in 1918" in The Standard Catalog of Cadillac, but saw many photos of 1918 cars with 25 straight louvers.
For example, I didn't see any pictures of Brougham with sloping louvers.
Is it a mistake of an authentication or a mistake of the Catalog?
I would like to know, were the Cadillacs produced with 25 louvers in 1918 really?
Were there Brouhgams with 9 inclined louvers?
Thank you in advance and really looking forward for your answers andn ideas where to look for more information.
Regards,
Vlad
Title: Re: 1918-1919 Cadillac bodies
Post by: Mike Baillargeon #15848 on April 18, 2020, 04:38:16 PM
Hello Vlad...welcome aboard!!

I'm no expert on the old Cadillacs but as I go to my reference book....the "80 years of Cadillac LaSalle" by Walter M.P. McCall.

It looks like all 1918 cars were model 57s and all the regular production cars have the 9 louvers leaned back 6 degrees like you said.....but it appears that the military staff and working vehicles had more louvers....the book said some 300 Limo cars were sent to Europe for WW1 to be used by senior officers.....and 1000s of Cadillacs were used as staff cars and ambulances in Europe....

Other military uses was a searchlight car....these Cadillacs pulled a 60 inch search light around the battle fields......another use was a Cadillac engine mounted on an engine stand looking platform and it was connected to a winch.....the winch was used to control military observer balloons....to deploy and then quickly retrieve when enemy aircraft was in the area.....How would you like that job...up in the balloon hoping when you have to quickly come back down to earth there won't be any vapor lock going on at the motor!!

Mike
Title: Re: 1918-1919 Cadillac bodies
Post by: V.Sorok on April 18, 2020, 05:45:12 PM
Mike, thanks for the answer.
I believed that all Types 57 had 9 tilted louvers in 1918. But too many cars with 25 straight louvers present now as 1918 cars. Is it possible to be so many mistakes? I began to question the accuracy of the Catalog entry. After all, the year of Type 57 release can be identified by engine number. Or does everyone want to have a car one year older?)
Military vehicles had 9 louvers in 1918 also. Here confirmation to it.

Vlad

Title: Re: 1918-1919 Cadillac bodies
Post by: V.Sorok on September 15, 2020, 05:57:31 PM
I raise my question with the hope that someone after a summer vacation will see this and write an answer)
Title: Re: 1918-1919 Cadillac bodies
Post by: fishnjim on September 16, 2020, 09:06:56 AM
This is one for a research library around Detroit.   There are several.  GM heritage center might also contain answers.   
Without bona fide cross checked photographic/documentation evidence, any forum answers are just "hearsay".

From what I know from reading, I surmise during that period, pre-'25 before consolidation, that bodies were often made by separate companies; Fisher body, etc., and maybe the source of the discrepancy.   So may need to specify the body maker as well to correctly identify cars of these years.
Title: Re: 1918-1919 Cadillac bodies
Post by: V.Sorok on September 16, 2020, 03:37:43 PM
Thank you for the reasoned opinion in your comment. I agree with your scientific approach to the question and will try different ways to find an answer. However, I hope that there are owners of such cars or their acquaintances on the forum, and they can answer based on facts (engine number, car history), not "hearsay".
Title: Re: 1918-1919 Cadillac bodies
Post by: Chris Cummings on September 17, 2020, 10:37:29 AM
Vlad,

There are a number of owners of 1918 and 1919 Cadillacs listed in the club directory.  One or more of them may have done some research in this area already, and you may be able to profit by their knowledge.

Best regards,

Chris Cummings
Title: Re: 1918-1919 Cadillac bodies
Post by: V.Sorok on September 17, 2020, 02:57:01 PM
Thank you, Chris!
I have no doubt about it, but I have no access to this directory and I see no point in bothering people if they themselves have no desire to share information.
Life is an amazing thing! You are proud of your knowledge today, and tomorrow you leave and knowledge can be lost forever...
Title: Re: 1918-1919 Cadillac bodies
Post by: 35-709 on September 17, 2020, 07:29:05 PM
Only a small percentage of the total Cadillac & LaSalle Club membership use or visit these forums.  Those that own Cadillacs of the vintage you are asking about are even less likely to visit here. 
As a member of the Cadillac & LaSalle Club, you would have the membership directory at your fingertips and the owners of '18/'19 Cadillacs would no doubt be most glad to hear from you and help you with your questions. 
Title: Re: 1918-1919 Cadillac bodies
Post by: V.Sorok on September 18, 2020, 06:45:26 AM
Thank you, but the Club membership is not free. It's expensive for me to pay so much for a probability of finding the answer to my question (a probability only, not the answer still).
Title: Re: 1918-1919 Cadillac bodies
Post by: chrisntam on September 19, 2020, 07:35:09 AM
Right now, you get a six month free introductory membership. If you want to join, it’s as little as 35 dollars a year.

That’s not expensive. Just don’t dine in a restaurant for one evening, that will easily cover a year’s membership.
Title: Re: 1918-1919 Cadillac bodies
Post by: V.Sorok on September 19, 2020, 07:05:13 PM
Thanks Chris, I took your kind advice)))