News:

Reminder to CLC members, please make sure that your CLC number is stored in the relevant field in your forum profile. This is important for the upcoming change to the Forums access, More information can be found at the top of the General Discussion forum. To view or edit your profile details, click on your username, at the top of any forum page. Your username only appears when you are signed in.

Main Menu

1953 Cadillac steering linkage

Started by jyinger, July 25, 2011, 01:31:53 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

jyinger

Are these parts interchangeable 1953-1954?

Thanks

Jon  jyinger1email addresses not permitted
Jon Yinger

Warren Rauch #4286

 You need to be more specific. example: The king pins fit 1941-55( will work on 1956). Most parts fit 50-53 or 54-56,but not all by any means. Power steering or not is also important.Warren

jyinger

I need the drag link pieces, esp. the driver's side tie rod end.  Will that piece from a '54 Cadillac (with power steering) interchange with a '53 Cadillac (with power steering)?

Thanks

Jon
Jon Yinger

Warren Rauch #4286

 The short answer is the outer is the same , the inner isn't.
Outer tie rod end  Cadillac right 267169 ,left 267168
  Fits 39-40 exc series 75,90, 3960s left;  41-56 all; 57-60 many
Moog and TRW make a replacement ES-103 ( both use same#) that fits both left and right sides. THe 3960s model is the only one that used left thread on the left side.
Inner tie rod end Cadillac #'s
  50-53 all  566 1546
  54-56 all  566 6355
adjusting tube   39-56 same , new number in 57  replaces it.
center link  for left hand drive cars Cadillac #'s
  50-53 all 566 1548
  54     all  566 6349
  55-56 all  566 8083
  Warren