News:

Due to a technical issue, some recently uploaded pictures have been lost. We are investigating why this happened but the issue has been resolved so that future uploads should be safe.  You can also Modify your post (MORE...) and re-upload the pictures in your post.

Main Menu

6 volt temperature indicator?

Started by John Barry [CLC17027], August 05, 2015, 02:35:49 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

John Barry [CLC17027]

I'm curious to know the actual temperature of the coolant in my '40 La Salle, as opposed to a qualitative cold-vs.-hot indication on the in-dash gauge.  I grant this means an after-market device would be installed.  Let's stipulate that I can live with that.  What I'm looking for would be one or more source recommendations, please.

While we're at it, can anyone verify that the drain port on the radiator on the same car is indeed a 1/8" pipe thread connection, as I suspect it is? 

Thanks.
John Barry (CLC 17027)
Now-retired editor/Publisher of the Valley Forge Region newsletter, The Goddess
1940 La Salle series 50 four door sedan

Bobby B

#1
John,
  Hi. I use a regular mechanical temperature gauge in the head of the flathead. There is NO WAY that I would ever rely on the factory gauge for any type of accurate reading. Anybody that owns a flathead that doesn't have an accurate gauge is asking for trouble. They all have a tendency to run hot, and I would rather know ahead of time than before it's too late. I have it mounted below the dash, barely noticeable, just above my left knee. Auto Meter makes excellent gauges and just about everybody carries them. Hope this helps!
                                                                                                                        Bobby
1947 Cadillac Series 62 Convertible Coupe
1968 Mustang Convertible
1973 Mustang Convertible
1969 Jaguar E-Type Roadster
1971 Datsun 240Z
1979 H-D FLH

bcroe

I use the gas tube type which require no power (except the night light) and work even
when the engine is off.  Some of these have a 270 degree scale, allowing a face much
smaller than a standard 2" gauge.  Hardly show, easy to locate.  Bruce Roe