News:

Due to a technical issue, some recently uploaded pictures have been lost. We are investigating why this happened but the issue has been resolved so that future uploads should be safe.  You can also Modify your post (MORE...) and re-upload the pictures in your post.

Main Menu

Weatherstrip Question

Started by Bill Kaufman #15225, February 19, 2008, 02:04:29 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Bill Kaufman #15225

Howdy all,

The old 1954 series 62 coupe is just about ready for paint and I wanted to get the new weatherstrip lined up for installation for when I get er back from the body shop. I have noticed that alot of different vendors like Kanters,USA parts etc... offer kits for the car. I was inclined to use their product because it seems to be less expensive than Steel Rubber or Soft Seal. Is the quality the same?Please give me your thoughts and feed back on the different qualities VS the prices that you have encountered. I know that in this hobby ,you seem to always get what you pay for.

Thanks,

Bill

homeonprunehill

Quote from: Bill Kaufman #15225 on February 19, 2008, 02:04:29 PM
Howdy all,

The old 1954 series 62 coupe is just about ready for paint and I wanted to get the new weatherstrip lined up for installation for when I get er back from the body shop. I have noticed that alot of different vendors like Kanters,USA parts etc... offer kits for the car. I was inclined to use their product because it seems to be less expensive than Steel Rubber or Soft Seal. Is the quality the same?Please give me your thoughts and feed back on the different qualities VS the prices that you have encountered. I know that in this hobby ,you seem to always get what you pay for.
Thanks,
Bill
02-19-08
Bill, when I tryed steele's for the running board matts,they said that they didn't have any left.So, I had to order from another vendor who was advertising RB matts. It had been made by Steele's, only cherper! If the other ordering houses are less expensive to the point of it not hurting your pocket book. I think I would go with something cherper, But I have only dealth with items made by steele. You didn't memtion METRO RUBBER .I've heard they're good.HTH
Good Luck,JIM


USED,ABUSED AND MISUSED CADILLACS AND LA SALLES

Mike Josephic CLC #3877

Bill:

Steele's material in my opinion is top notch.  I purchased all of the rubber
for my '55 Eldo from them and have been very pleased with the fit and
authenticity.

They aren't the cheapest, but in this case you do get what you pay for.
If you go to all the trouble for a restoration, why skimp on the rubber?

Just my opinion,

Mike

1955 Cadillac Eldorado
1973 Cadillac Eldorado
1995 Cadillac Seville
2004 Escalade
1997 GMC Suburban 4X4, 454 engine, 3/4 ton
custom built by Santa Fe in Evansville, IN
2011 Buick Lucerne CX
-------------------------------------
CLCMRC Museum Benefactor #38
Past: VP International Affiliates, Museum Board Director, President / Director Pittsburgh Region