News:

Due to a technical issue, some recently uploaded pictures have been lost. We are investigating why this happened but the issue has been resolved so that future uploads should be safe.  You can also Modify your post (MORE...) and re-upload the pictures in your post.

Main Menu

how to remove the horn ring from a 1957 cadillac

Started by Stan Pierce, July 01, 2008, 07:10:47 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Stan Pierce

I need to remove my steering wheel and horn ring.I can use any info on how to remove the horn ring from a 1957 cadillac .

Ralph Messina CLC 4937

Stan,

Look at the back side of the wheel / horn ring assembly. There are two Allen type screws that hold the horn ring in place. I don’t remember exactly where, but I believe they are in the space between the wheel spoke and the chrome horn spokes close the center. You'll likely need a flash light to see into the space.

HTH,
Ralph
1966 Fleetwood Brougham-with a new caretaker http://bit.ly/1GCn8I4
1966 Eldorado-with a new caretaker  http://bit.ly/1OrxLoY
2018 GMC Yukon

Doug 16070

#2
Ralph,
Thanks for the tip. My horn ring was loose & I was wondering  how to tighten it. It rattled quite a bit. Good to go now.