News:

Due to a technical issue, some recently uploaded pictures have been lost. We are investigating why this happened but the issue has been resolved so that future uploads should be safe.  You can also Modify your post (MORE...) and re-upload the pictures in your post.

Main Menu

1939 Model 75 running board covering

Started by clockman1700, March 03, 2009, 09:43:26 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

clockman1700

Greetings,
              Any suggestions regarding re-covering running boards for a 1939 model 75 Cadillac? Any help would be greatly appreciated.
                                                                                        Thanks Barry
                                                                                                     610-779-5860
                                                                                                                            clockman1700@comcast.net
BarryTorrente                                                                                                          1939 Brunn town car 75

Mike Lepak 17679

Quote from: clockman1700 on March 03, 2009, 09:43:26 PM
Greetings,
              Any suggestions regarding re-covering running boards for a 1939 model 75 Cadillac? Any help would be greatly appreciated.
                                                                                        Thanks Barry
                                                                                                     610-779-5860
                                                                                                                            clockman1700@comcast.net

Barry,
Have you tried Gerald Capak in Vero Beach Fl.? I bought a set from him a while back and they were excellent. My car is a 90 series but they are
the same pattern ribs and he also supplied the flap that attaches to the body. I found his phone in my archives...(772) 567-5297

clockman1700

Quote from: Mike Lepak 17679 on March 04, 2009, 09:27:28 PM
Barry,
Have you tried Gerald Capak in Vero Beach Fl.? I bought a set from him a while back and they were excellent. My car is a 90 series but they are
the same pattern ribs and he also supplied the flap that attaches to the body. I found his phone in my archives...(772) 567-5297

Hi Mike, Thanks so much for the info, I did talk to Gerald and what concerned me was that the width is very short of the board, thus creating a peicing of the rubber, is that what you encountered and if so, was it a problem. Thanks Barry
BarryTorrente                                                                                                          1939 Brunn town car 75

Brad Ipsen CLC #737

Barry,

The splice is minimal and works out satisfactory.  Considering the options this is a very minor problem.

Brad
Brad Ipsen
1940 Cadillac 60S
1938 Cadillac 9039
1940 Cadillac 6267
1940 LaSalle 5227
1949 Cadillac 6237X
1940 Cadillac 60S Limo