Author Topic: 1947 Fleetwood Front License Plate Bracket  (Read 825 times)

Offline A. Amman #15293

  • Posts: 94
  • CLC Number: #15293
  • Name: Anthony P. Amman
1947 Fleetwood Front License Plate Bracket
« on: April 28, 2011, 03:45:55 PM »
Can someone hook me up with a photo of the lower portion of the bracket clamp that grabs the backside of the front bumper to hold the bracket to the bumper?  I've lost my reference.

Thanks,
Anthony Amman #15293

Offline Bill Ingler #7799

  • Posts: 1651
Re: 1947 Fleetwood Front License Plate Bracket
« Reply #1 on: April 28, 2011, 09:30:49 PM »
Pictures below should help you. Easy to make. Get some 1 inch wide bar stock and cut off a piece about 1 3/4 inch long. Bend in the middle 90 degrees. Drill about a 1/4 inch hole at one end and you have your bracket.   Bill

Offline A. Amman #15293

  • Posts: 94
  • CLC Number: #15293
  • Name: Anthony P. Amman
Re: 1947 Fleetwood Front License Plate Bracket
« Reply #2 on: April 28, 2011, 11:39:27 PM »
Thank you, Bill!  That was just what I needed.

Anthony Amman #15293

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 



All Cads