Author Topic: Wirering in a Electric Fuel pump  (Read 822 times)

Offline Bill Balkie 24172

  • Posts: 1177
  • 1970 Coupe DeVille/ 2009 CTS
Wirering in a Electric Fuel pump
« on: November 11, 2011, 11:01:59 PM »
Hello,
 I have had electric fuel pumps on my cars and always add a push / pull cut off switch  so the pump can be turned off at any time .  My question is where is the best place to tap into the electric system .  I purchase a car about 5 years ago and it was tapped into  the resister ballist on the fire wall .  Any advice will be greatly Appreciated .
Bill Balkie
1970 Coupe DeVille
2009 CTS

Online Dave Shepherd

  • Posts: 2428
Re: Wirering in a Electric Fuel pump
« Reply #1 on: November 12, 2011, 08:54:05 AM »
Any key on 12v/6v source that does not carry high loads to another circuit is good, over size wire is appropriate for a long distance hook up.

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13