News:

Due to a technical issue, some recently uploaded pictures have been lost. We are investigating why this happened but the issue has been resolved so that future uploads should be safe.  You can also Modify your post (MORE...) and re-upload the pictures in your post.

Main Menu

Wirering in a Electric Fuel pump

Started by Bill Balkie 24172, November 11, 2011, 11:01:59 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Bill Balkie 24172

Hello,
I have had electric fuel pumps on my cars and always add a push / pull cut off switch  so the pump can be turned off at any time .  My question is where is the best place to tap into the electric system .  I purchase a car about 5 years ago and it was tapped into  the resister ballist on the fire wall .  Any advice will be greatly Appreciated .
Bill Balkie
1970 Coupe DeVille
2009 CTS

Dave Shepherd

Any key on 12v/6v source that does not carry high loads to another circuit is good, over size wire is appropriate for a long distance hook up.