News:

Due to a technical issue, some recently uploaded pictures have been lost. We are investigating why this happened but the issue has been resolved so that future uploads should be safe.  You can also Modify your post (MORE...) and re-upload the pictures in your post.

Main Menu

FRONT TURN SIGNAL

Started by Chasmann, November 17, 2011, 11:51:15 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Chasmann

I AM IN THE PROCESS OF DISMANTLING MY GRILL AND SOME OTHER CHROME PIECES. I WOULD LIKE TO KNOW HOW THE PLUG DISCONNECTS FROM THE REAR OF THE HOUSING OF THE FRONT TURN SIGNALS.I WOULD APPRECIATE ANY ADVICE.THANKS CHARLIE 1949 SERIES 62
1949 SERIES62 4DR SEDAN                                      1936 SERIES 60 4DR TOURING SEDAN

Dave Shepherd


Roger Zimmermann

If I understand well, Charlie has a 1949 Serie 62.
1956 Sedan de Ville (sold)
1956 Eldorado Biarritz
1957 Eldorado Brougham (sold)
1972 Coupe de Ville
2011 DTS
CLCMRC benefactor #101

Chasmann

THANKS ROGER.I FIGURED IT OUT. CHARLIE
1949 SERIES62 4DR SEDAN                                      1936 SERIES 60 4DR TOURING SEDAN

49 Convertible

As I remember it the wires stay in the housing and continue up to the fender blocks on each side where there is a block with screws in it mounted to the fender paneland you loosen the screws and draw the wires back thru the fender to the housing and remove the housing with wires still attached

Herman
Herman Desser
clc # 19416