News:

Due to a technical issue, some recently uploaded pictures have been lost. We are investigating why this happened but the issue has been resolved so that future uploads should be safe.  You can also Modify your post (MORE...) and re-upload the pictures in your post.

Main Menu

1957 differential

Started by gandt57, September 17, 2012, 05:07:22 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

gandt57

I have a 1957 CDV with a unrepairable diff. After 12 years of ownership I decided to have the pinion seal replaced and was shocked to see the damage ( snapped axle support housing).
The gear is a code 3 3.06:1. My questions are.
1. is a gear code 6 3.36:1 diff going to be suitable?  2. Will a diff from a 390 fit the 57 Housing"
Thank You
Gary Scott

LeRoy DeVol

The gear ratio " 3.36 " will effect your MPG but it may fit. It probably is from a older Cad. with a smaller engine. I would do a search & try to get the proper one.

Lee DeVol

Bob Hoffmann CLC#96

Hollanders shows 57 to 62.
HTH, Bob
1968 Eldorado slick top ,white/red interior
2015 Holden Ute HSV Maloo red/black interior.
             
Too much fun is more than you can have.

gandt57

Bob and Leroy. I want to thank you kindly for your assistance. The 336.1 gear was for the duel carbed and air conditioned cars of 57 also the series 75 Nine pass and limos.
Your advice had helped me locate a suitable replacement that my Diff engineer can make work.
Cheers and thanks again
Gary Scott