News:

Due to a technical issue, some recently uploaded pictures have been lost. We are investigating why this happened but the issue has been resolved so that future uploads should be safe.  You can also Modify your post (MORE...) and re-upload the pictures in your post.

Main Menu

Wiring help for 1956 trunk release/pull-down

Started by Charlie CLC#18187, October 27, 2014, 12:19:34 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Charlie CLC#18187

I am testing one of the above units on the bench, but not quite sure how to do it.  If I ground it and touch power to either the green or orange lead on the motor, it goes up or down fine.

It has a pink and a black lead for hook up in the car. Black goes to the latch switch, pink to the pressure switch, on same terminal as red lead to the latch switch. 

When I ground the unit and touch power to the pink lead, I get an arc. 

I know this should be simple.  Maybe the pressure switch is not wired correctly.  Anyone have a wiring diagram for this and/or advice? 

thanks
Charlie   
1956 Coupe de Ville