1955 Cadillac Fleetwood New Exhaust

[Bob Kielar]

Share this video
https://youtu.be/Zs-b7XBg68M

Here are some pictures of the old exhaust. Every joint and hanger was welded to the system. Had fun with the saws all.

Keep Cruzin,
Bob Kielar

[Bob Kielar]

https://youtu.be/JDOAePjdwT0

First I would like to thank everyone for there input on getting this project completed. Thanks to Lou on the recommendation of Waldrons great company just long lead time about 8 weeks and also tips on the install. Thanks to Ken on how to get the flex tubing on as you can see in the picture with the 2x4 and sludge hammer in the end of the pipe. The only way I could get the flex pipe over the drivers side was to make slits in the tubing to make the bend but it's hardly noticeable. I also installed the bracket from the bell housing to the drivers side exhaust pipe you can see it in the picture.The wife and I took dB readings while driving so after the salt is off the roads we will see what the results are.

Keep Cruzin,
Bob Kielar

[Jeff Rosansky CLC #28373]

Nice!
Jeff