Speedy Sleeve

Started by 67 Cadillac, March 01, 2018, 12:49:30 PM

Previous topic - Next topic

67 Cadillac

Hi,
I want to throw a speedy sleeve on the crank of my 67 429. I am wondering if someone might know the size off hand.

Thanks if you can help!

Jeff

"Cadillac Kid" Greg Surfas 15364

Cadillac Kid-Greg Surfas
Director Modified Chapter CLC
CLC #15364
66 Coupe deVille (now gone to the UK)
72 Eldo Cpe  (now cruising the sands in Quatar)
73 Coupe deVille
75 Coupe deElegance
76 Coupe deVille
79 Coupe de ville with "Paris" (pick up) option and 472 motor
514 inch motor now in '73-

TJ Hopland

If you do it let us know how it works out.   I have tried them a couple times and they just didn't seem to fit correctly.  The one that did seem to work somehow got loose and made a worse leak than I had originally.  These were not 429's or even crank seals for that matter but I think the concept is basically the same wherever they are used.
StPaul/Mpls, MN USA

73 Eldo convert w/FiTech EFI
80 Eldo Diesel
90 CDV
And other assorted stuff I keep buying for some reason

The Tassie Devil(le)

I have never had any problems with installing or using a Speedy-sleeve.

I use Loctite Super Bearing Mount to seal it in position.   Acts as a lubricant when installing as well.

Bruce. >:D
'72 Eldorado Convertible (LHD)
'70 Ranchero Squire (RHD)
'74 Chris Craft Gull Wing (SH)
'02 VX Series II Holden Commodore SS Sedan
(Past President Modified Chapter)

Past Cars of significance - to me
1935 Ford 3 Window Coupe
1936 Ford 5 Window Coupe
1937 Chevrolet Sports Coupe
1955 Chevrolet Convertible
1959 Ford Fairlane Ranch Wagon
1960 Cadillac CDV
1972 Cadillac Eldorado Coupe

TJ Hopland

My experience was too long ago for me to remember the finer details.   Perhaps not using a loctite sort of product was my issue.   I don't remember buying anything extra so if it didn't come in the kit I likely didn't use it.   
StPaul/Mpls, MN USA

73 Eldo convert w/FiTech EFI
80 Eldo Diesel
90 CDV
And other assorted stuff I keep buying for some reason

The Tassie Devil(le)

One reason I use the Loctite is that the reason the Speedie Sleeve being used is because the area under it is not perfect.

Loctire Super Bearing Mount takes up the imperfections, and seals the surface between the sleeve and the shaft.

Bruce. >:D
'72 Eldorado Convertible (LHD)
'70 Ranchero Squire (RHD)
'74 Chris Craft Gull Wing (SH)
'02 VX Series II Holden Commodore SS Sedan
(Past President Modified Chapter)

Past Cars of significance - to me
1935 Ford 3 Window Coupe
1936 Ford 5 Window Coupe
1937 Chevrolet Sports Coupe
1955 Chevrolet Convertible
1959 Ford Fairlane Ranch Wagon
1960 Cadillac CDV
1972 Cadillac Eldorado Coupe

TJ Hopland

Makes sense.  Starts wet so its a lubricant then turns to glue.   Directions could have said that but I bet I didn't bother to read them and it was before the internet was an option.
StPaul/Mpls, MN USA

73 Eldo convert w/FiTech EFI
80 Eldo Diesel
90 CDV
And other assorted stuff I keep buying for some reason

67 Cadillac

Thanks Guys. I really appreciate your feedback. The loctite sounds like a good idea.
J