Can I buy a License Plate Frame for 2013 Escalade Premium that Has None?

[Varooom]

Can I buy a License Plate Frame for 2013 Escalade Premium that Has None?  My car came without one and we need them here in Texas.  My previous one had it molded as an integral part the front grill.  This one has nothing in all in place.

[gkhashem]

https://www.carparts.com/details/Cadillac/Escalade/Replacement/License_Plate_Bracket/2013/Platinum/8_Cyl_6-dot-2L/REPC017306.html?showfitment=true


not sure if OE match but says so

another

https://www.ebay.com/itm/License-Plate-Bracket-For-2008-14-Cadillac-Escalade-Escalade-ESV-Platinum-Front/132862761020?_trkparms=aid%3D1110001%26algo%3DSPLICE.SIM%26ao%3D1%26asc%3D60380%26meid%3D9f35d712a4624b75811fe9e95c2cda40%26pid%3D100008%26rk%3D3%26rkt%3D12%26sd%3D152863122911%26itm%3D132862761020%26pmt%3D1%26noa%3D0%26pg%3D2047675&_trksid=p2047675.c100008.m2219

[Varooom]

Mine did not come with a bracket and has a different front air dam with zero plate mounting surface so I don't think "replacement" will work But thatnks for your time to post!  I might need to get a little off-center bracket.  Cops pull you over in Texas without one.

[gkhashem]

well since the car is 6 years old go to the dealer or at least have them pull up the part number. It still should be available.

[Varooom]

Thanks - I looked at this more closely and I think it will fit the Premium bumper.  $39 bucks with a mounting kit is OK.

[dochawk]

Check first . . . when I bought my '06 Miata, I made them mount a plate frame, as it's required here.  I would come to find out that:

A) it didn't work well at all, and I had to remount it regularly, and
B) the law here only requires it for vehicles actually *equipped* for it . . .

[Bob Hoffmann CLC#96]

There's a co. locally that makes front frames so you DON'T have to drill your bumper. I think it's called Sto N Show but I'm not sure. They sell thousands of them for various cars.  If you want, I can get the correct info.
Bob