All Cads

Author Topic: 1961 Exhaust hanger  (Read 347 times)

Offline Bwt

  • Posts: 16
  • Name: B Tilles
1961 Exhaust hanger
« on: October 15, 2021, 11:31:54 PM »
Recently acquired a 30,000 mile 1961 Series Sixty-Two six window sedan.  The Fontana rose car is truly unmolested with window sticker etc.
I am trying to maintain the originality. The hangers for the exhaust are all original and intact except for the rear that supports the resonator. Looking through the internet, I found what was supposed to be an NOS part.  It arrived today and I  do not believe it is correct.  Can someone post a good picture of this hanger that shows the proper mounting  to both the frame and the tailpipe please? The car even had the original shocks, and ignition wires, which I replaced but kept of course. I just do not want to rig something on this car.  I appreciate any assistance.

Offline Bwt

  • Posts: 16
  • Name: B Tilles
Re: 1961 Exhaust hanger
« Reply #1 on: October 16, 2021, 12:41:28 PM »
61 is one year only. From what I have seen that does not appear to be the same. Is that on a 62?

Offline David Greenburg

  • CLC #3830
  • Posts: 1997
  • CLC Number: 3830
  • Name: David Greenburg
Re: 1961 Exhaust hanger
« Reply #2 on: October 16, 2021, 02:29:10 PM »
Here are a couple of shots of the hanger on my ‘61 Fleetwood with 27k miles.
David Greenburg
'60 Eldorado Seville
'61 Fleetwood Sixty Special

Offline Bwt

  • Posts: 16
  • Name: B Tilles
Re: 1961 Exhaust hanger
« Reply #3 on: October 17, 2021, 12:18:35 PM »
I have it figured out. Thanks for your assistance.

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13