News:

Reminder to CLC members, please make sure that your CLC number is stored in the relevant field in your forum profile. This is important for the upcoming change to the Forums access, More information can be found at the top of the General Discussion forum. To view or edit your profile details, click on your username, at the top of any forum page. Your username only appears when you are signed in.

Main Menu

1941 Cadillac Series 63 Under Door Strip

Started by J. Russo, December 03, 2021, 08:45:37 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

J. Russo

Please see attached front photos. I'm not sure what this area is called, but I am wondering if there is an insert that is supposed to be installed under the rubber strip. My rear strips are secure, but it looks like someone installed them on top of a piece of roofing shingle.

Would also like recommendations on type of adhesive I should use to secure the rubber strip.

Thank you
Thanks,
John Russo
CLC Member #32828

harry s

John, The door sill rubber is vulcanized to a thin metal piece with clips that go into the series of holes you see in the picture. The rubber you have appears to be fairly thin runner type material. If you check some of the vendors you can find thicker material with a pattern closer to the original type. There is a vendor (in Canada I think) that will reproduce those pieces as original but they are very expensive. If you decide on placing the rubber directly to the sill you can use contact cement or even double sided tape. Harry
Harry Scott 4195
1941 6733
1948 6267X
2011 DTS Platinum