News:

Due to a technical issue, some recently uploaded pictures have been lost. We are investigating why this happened but the issue has been resolved so that future uploads should be safe.  You can also Modify your post (MORE...) and re-upload the pictures in your post.

Main Menu

Seville STS93 - cooling system

Started by Hanna, January 26, 2005, 08:00:30 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Hanna

Thank you very much!
A good Cadillac’s service is hard to find in Poland .
I pay a lot of money for  repair and I have  problems all the time.  I changed   the radiator and the waterpump. Thank! Firstly I must change coolant!
Mike suggestion of air in the coolant is  OK.  I want to vent the cooling system but  I don’t know  how to do it.

greetings
Hanna

JIM CLC # 15000

01-26-05
Hanna, pick the hose that is at the highest point in the engine compartment.
Loosen the clamp, slip the hose off just a little to expose the area where the clamping takes place.
Drill a very small hole in the hard pipe that it connects to, the air will come out, then the coolent, push the hose in place and tighten the clamp.
Wipe-up coolent, you should be in business.
Good Luck, Jim