News:

Due to a technical issue, some recently uploaded pictures have been lost. We are investigating why this happened but the issue has been resolved so that future uploads should be safe.  You can also Modify your post (MORE...) and re-upload the pictures in your post.

Main Menu

Rare 59 horn ring

Started by Tom Holderness, March 29, 2005, 02:17:09 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Tom Holderness

These things go for around $250-$400 because most have been broken and discarded because they are difficult to weld, being pot metal.  There is a half one on eBay about to expire:  http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=4537989707&sspagename=STRK3AMEWA3AIT TARGET=_blank>http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=4537989707&sspagename=STRK3AMEWA3AIT
This is what one looks like on my SDV:  http://hometown.aol.com/psmker/myhomepage/photo.html TARGET=_blank>http://hometown.aol.com/psmker/myhomepage/photo.html

Dave Greenburg (3830)

That is absurd.  Why would anyone pay anything for half a 59 horn ring?  

Dave
59 Fleetwood 60S

JIM CLC # 15000

04-03-05
Dave, having the bottom-half is better then not having any ring at all, and if you already have the top-half, a "good" welder of "pot" metal can make a complete ring of the two halves.
There is/are rings for that year that someone makes-up in "SS" that doesnt break so easely.
Hope this is an answer to your question/comment.
Good Luck, Jim