News:

Due to a technical issue, some recently uploaded pictures have been lost. We are investigating why this happened but the issue has been resolved so that future uploads should be safe.  You can also Modify your post (MORE...) and re-upload the pictures in your post.

Main Menu

floor pans for my 1960

Started by Rob, July 05, 2006, 07:38:43 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Rob

Can anybody tell me where I can buy new floor pans for my 1960 cad? website address would be most appreciated.

Thanks,

Rob

Bruce Reynolds # 18992

Gday Rob,

Depending on which parts you are wanting, try the Chevrolet parts suppliers like Late Great Chevys in Florida.

Give Brenda Stinnet an email bcs@lategreatchevy.com) and she may be able to assist.

I wouldnt be surprised if the floor pan shape for most GM cars of simmilar years are interchangeable.

Bruce,
The Tassie Devil(le),
60 CDV

Chris McBride

sir

a previous post on this topic:

http://www.cadillaclasalleclub.org/cgi-bin/user/forum.cgi?select=2Fclc2Fclcgenl2F59495 TARGET=_blank>http://www.cadillaclasalleclub.org/cgi-bin/user/forum.cgi?select=2Fclc2Fclcgenl2F59495

in turn referenced

http://www.classicfabrication.com/ TARGET=_blank>http://www.classicfabrication.com/

i have not used this vendor and have no other information concerning it

the possible use of other GM parts was also discussed (along with the names of some possible vendors) at

http://groups.msn.com/196364CadillacCommunity/general.msnw?action=get_message&mview=0&ID_Message=17011&ID_CLast=17034&CDir=1 TARGET=_blank>http://groups.msn.com/196364CadillacCommunity/general.msnw?action=get_message&mview=0&ID_Message=17011&ID

hope this helps

good luck


Chris

p.s.  Bruce, its good to see your awake.  Is it tommorow there?

Chris McBride

sorry

im not very good at links

the discussion (cut and pasted):

Brad hemingson
   
Thursday, 1/27/05 12:50 PM    
Does anyone know if Classic Fabrication is still in business? They make (or made) replacement floor pans for 1960s Cadillacs and Buicks etc. Ive lost their website address and cant find them on google. They were in South Carolina.

Re: Classic Fabrication
Vince Taliano #13852

   
Thursday, 1/27/05 1:11 PM    
http://www.classicfabrication.com/ TARGET=_blank>http://www.classicfabrication.com/

Re: Classic Fabrication
Randall Ayers McGrew CLC # 17963

   
Thursday, 1/27/05 1:17 PM    
Try them at : CLASSIC FABRICATION, 843-650-0385, SC;
Or go to http://www.classicfabrication.com TARGET=_blank>http://www.classicfabrication.com

I found their listing in Hemmings at http://www.hemmings.com. TARGET=_blank>http://www.hemmings.com.

:)

Bruce Reynolds # 18992

Yes Chris,

It is tomorrow here, and the sun is shining brightly.  And I wont be heading to bed for another 9 hours, so I will let you know if the world has blown up.

So, you can sleep soundly, in the knowlege that the sun will rise on another day.

Bruce,
The Tassie Devil(le),
60 CDV

James I. Garner

Classic Fabrication is still in business. I recently bought a set of floor pans from them. They do good work. classicfabrication.com
Jim

Sam Moore #21210

Try F.E.N. Enterprises.

http://www.fenenterprises.com/ TARGET=_blank>http://www.fenenterprises.com/

A couple of years ago, I spoke with Frank Nicodemus about their reproduction pans for a 56 and was impressed with his description of what they offered. Frank uses a heavier gauge steel than most other fabricators.

Rob

Thank you for all the information!

Rob

Brad Hemingson

Classic Fabrication is a bust. I have phoned them numerous times and got one phone call returned. No other calls or e-mails connected. In the hunt for a pan for my 66 I came across vendors for floor pan patches from 1959-1964. If i can remember where i will post.