News:

Due to a technical issue, some recently uploaded pictures have been lost. We are investigating why this happened but the issue has been resolved so that future uploads should be safe.  You can also Modify your post (MORE...) and re-upload the pictures in your post.

Main Menu

Cadillac 331 3x2 intake manifold, carbs, and linkage

Started by John S, February 18, 2024, 10:59:43 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

John S

Vintage Edelbrock CD-693 3x2 intake manifold for Cadillac 331, 365, and first-gen 390. Carbs are 9Super7s from Speedway Motors, one primary and two secondaries. Linkage made by Dick's Hot Rod Carbs. Air cleaners are Edmunds reproductions from O'Brien Truckers. Carbs and air cleaners have about 200 miles on them. Setup has been in a garage for a few months so should be disassembled and cleaned prior to installation and use. Please message for photos and I can email them to you. For some reason the forum isn't letting me upload them.

tuff57

Joseph Tuffarelli

John S

$3,000 for the whole thing. I'm not parting it out. If you'd like to see images let me know.

dogbergs

Have you tried the HAMB market place? since this is more of a hot rod piece.
Very nice intake! I have the Offy 3x2 but I think yours could be even more sought after.

/ Johan
-51 62 convertible, project
-64 Dodge Polara
-70 Volvo 121
-63 Plymouth Max Wedge clone, project
-42 Harley WLA
-33 Ford Pick up, project

John S

Hadn't thought about that, but you're right. Will look into it. Thanks