Cadillac & LaSalle Club Discussion Forum

Cadillac & LaSalle Club Forums => Want To Buy - Parts => Topic started by: 28cad30las on March 11, 2023, 11:34:12 PM

Title: Wanted : Parts for a 1928 Cadillac
Post by: 28cad30las on March 11, 2023, 11:34:12 PM
Wanted: for a 1928 Cadillac Convertible - Two Hood Hold Downs, Metal Plate over Carburetor stating, "Cadillac V-8", Bottom Track for Side Windows that Window Regulator attaches to, and Golf Bag Door. Please email me at carman1930@yahoo.com if you have any of these parts. Thank you.
Title: Re: Wanted : Parts for a 1928 Cadillac
Post by: yachtflame on March 20, 2023, 05:09:28 PM
I have a nice carb cover with V8 on it but I'm not sure what year it is. You can contact me at
yachtflame@yahoo.com

Wayne
Title: Re: Wanted : Parts for a 1928 Cadillac
Post by: cadillac32 on March 20, 2023, 08:51:56 PM
I might have the hood hold downs. Please add a picture with dimensions to make sure I can match your needs. Jim
Title: Re: Wanted : Parts for a 1928 Cadillac
Post by: yachtflame on March 21, 2023, 01:51:02 PM
When you say plate over the carb, do you mean the round plate screwed into the top of the carburetor? If it's 1928, it should only have 4 screws holding it. I may have some of those cast in bronze as the pot metal originals corroded badly.
 You can contact me directly at
yachtflame@yahoo.com
Title: Re: Wanted : Parts for a 1928 Cadillac
Post by: 28cad30las on March 21, 2023, 11:27:00 PM
Quote from: cadillac32 on March 20, 2023, 08:51:56 PMI might have the hood hold downs. Please add a picture with dimensions to make sure I can match your needs. Jim

Jim,
My hood hold down is approximately 6.375 inches long from top of grip to where it bolts to fender. The center to center dimension of bolt holes where it bolts to fender is 1.5 inches. I am new to the club and cannot figure out how to get a picture of the hold down to you. Can you email me at carman1930@yahoo.com and I will send off a picture of it to you.
Thanks,
Bill
Title: Re: Wanted : Parts for a 1928 Cadillac
Post by: cadillac32 on March 22, 2023, 06:31:21 PM
Bill,
Private message sent.
Jim
Title: Re: Wanted : Parts for a 1928 Cadillac
Post by: 28cad30las on March 22, 2023, 10:44:58 PM
Jim,

I don't know how to access the private message you sent me in the CLC system. Could you tell me what I'm supposed to click on to get it to appear?

Again, my email address is    carman1930@yahoo.com

If you could email me there I would be able to send you back the pictures of my hold downs or if you can tell me where to click in the CLC system I would be able to read your private message.

Regards,
Bill
Title: Re: Wanted : Parts for a 1928 Cadillac
Post by: The Tassie Devil(le) on March 22, 2023, 11:51:52 PM
To read your Private Message, you need to do either of two things.

Firstly, you should have received an email telling you that you have been sent a PM.  Then, in that message, there will be a link to be able to open up your CLC Forum Inbox.

Secondly, you could simply go to the top of the Forum Page and you will see your name, and "My Messages".  Open up the My Messages at the Inbox, and it should be there.

Bruce.  >:D