News:

Due to a technical issue, some recently uploaded pictures have been lost. We are investigating why this happened but the issue has been resolved so that future uploads should be safe.  You can also Modify your post (MORE...) and re-upload the pictures in your post.

Main Menu

1958 CDV turn signal cancel spring installation specifics (again !)

Started by TomJudd, May 11, 2022, 08:34:42 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

TomJudd

I would appreciate tips on proper installation of the cancel spring. Have had apart many times. I am using NOS spring. Question is .....When spring is installed, there is two tabs/tangs which hold down or retain the spring. Are these tabs suppose to be bent down to securely hold spring, or not bent down to let spring arm "float". Someone has been in here before, so not sure how they are supposed to be !   I also have 3 NOS springs for sale $40 each. Thanks.

dn010

A quick check of ebay shows this:

-----Dan Benedek
'57 Cadillac Sedan Deville 6239DX
'81 DMC DeLorean

TomJudd

Thx, It appears the tangs ARE to be bent down. Time to access mechanism agaaaaaaaaain ! Am now a master at getting the horn ring off !