Cadillac & LaSalle Club Discussion Forum

Cadillac & LaSalle Club Forums => Technical / Authenticity => Topic started by: Dan Marinola on August 06, 2009, 07:49:02 AM

Title: 1994 Fleetwood Radio
Post by: Dan Marinola on August 06, 2009, 07:49:02 AM
I have a 94 Fleetwood with a radio problem. Does anyone know if I purchase a head end radio ( the part in the dash) if I need to have the ECM scan it for it's serial number to allow it to play? Is there some kind of antitheft system on these radios? Any help greatly appreciated. Thanks,Dan.
Title: Re: 1994 Fleetwood Radio
Post by: Walter Youshock on August 06, 2009, 09:26:29 AM
The part in the dash is just a control head.  The actual "radio" and amplifier is buried somewhere inside your dashboard.
Title: Re: 1994 Fleetwood Radio
Post by: Dan Marinola on August 06, 2009, 09:55:56 AM
Thanks for the reply Walter but I think the rest of the "radio"is in the trunk mounted close to the antenna. The question is do I have to reacquaint the head end radio in the dash with the ECM of the car to make it play. Something about antitheft of radio components from the factory. Thanks,Dan
Title: Re: 1994 Fleetwood Radio
Post by: Walter Youshock on August 06, 2009, 10:02:41 AM
Right you are--it IS in the trunk!  That was a smart move that came way too late.

Anyway, you shouldn't have to do anything to "reacquaint" the radio.  Just plug it in.

Is there anything in your Owner's MAnual regarding a Theftlok feature on the radio?  I thought that came later, like 1996.
Title: Re: 1994 Fleetwood Radio
Post by: jeff1956 on August 06, 2009, 03:34:46 PM
some gm radios require a scan tool be plugged in and the vin programmed in order to work....requires you show a receipt of purchase for the replacement radio as they likely will not reprogram for fear of it being stolen.
Title: Re: 1994 Fleetwood Radio
Post by: okccadman on August 06, 2009, 06:57:05 PM
I worked at a dealership in 1994 and swapped many of these units into and out of sold cars for customers.  You can just plug it in and go.  No computer coordination is necessary at all.  The only trick is not losing any of the tiny clips that hold the upper woodgrain moulding on!