News:

Due to a technical issue, some recently uploaded pictures have been lost. We are investigating why this happened but the issue has been resolved so that future uploads should be safe.  You can also Modify your post (MORE...) and re-upload the pictures in your post.

Main Menu

Help

Started by Bigjoe313, March 29, 2023, 05:56:10 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Bigjoe313

Bought a 1966 convertible. Having turn signal issues. Will a 1967 column fit a 66 if so does anybody have a good one for sale?

Joe Jensen

I have not worked in a '66 or '67 but, wouldn't it be easier to fix / replace your turn signal switch and/or wiring? 

Changing a column on a fully assembled car looks to be a good size job.

Good luck!
Joe

Bigjoe313

Found issue of little actuator lever that operates bowden cable to turnsignal switch. Bought new lever over 100$ and installed signals worked properly. Wife drove car 1 time now signals no longer work again stuck on 1 side. 67 column has signal switch all up near steering wheel and no cable. Just curious if 67 column will bolt up in 66. I can fix wiring.

35-709

If it is a T&T '67 column you're considering, you do not want it.  '67 T&T signal switches are flawed and delicate and basically unobtainable.  A straight '67 column has a different directional switch and would be OK, if it would fit.
1935 Cadillac Sedan resto-mod "Big Red"
1973 Cadillac Caribou - Sold - but still in the family
1950 Jaguar Mark V Saloon resto-mod - Sold
1942 Cadillac 6269 - Sold
1968 Pontiac Bonneville Convertible - Sold
1950 Packard 2dr. Club Sedan
1935 Glenn Pray - Auburn Boattail Speedster, Gen. 2